Description

In DSCOVR_EPIC_L2_composite_02, cloud property retrievals from multiple imagers on low Earth orbit (LEO) satellites (including MODIS, VIIRS, and AVHRR) and geostationary (GEO) satellites (including GOES-13 and -15, METEOSAT-7 and -10, MTSAT-2, and Himawari-8) are used to generate the composite. Based on the CERES cloud detection and retrieval system, all cloud properties were determined using a standard set of algorithms, the Satellite ClOud and Radiation Property Retrieval System (SatCORPS). Cloud properties from these LEO/GEO imagers are optimally merged to provide a seamless global composite product at 5-km resolution by using an aggregated rating that considers five parameters (nominal satellite resolution, pixel time relative to the EPIC observation time, viewing zenith angle, distance from day/night terminator, and sun glint factor) and selects the best observation at the time nearest to the EPIC measurements. About 72% of the LEO/GEO satellite overpass times are within one hour of the EPIC measurements, while 92% are within two hours of the EPIC measurements. The global composite data are then remapped into the EPIC FOV by convolving the high-resolution cloud properties with the EPIC point spread function (PSF) defined with a half-pixel accuracy to produce the EPIC composite. PSF-weighted radiances and cloud properties averages are computed separately for each cloud phase. Ancillary data (i.e., surface type, snow and ice map, skin temperature, precipitable water, etc.) needed for anisotropic factor selections are also included in the composite. These composite images are produced for each observation time of the EPIC instrument (typically 300 to 600 composites per month).

DOI

---

---

Citation Styles for this Dataset

Resources and Documentation

---

Earthdata Forum

GOTO WEB TOOL

EPIC URL

PROJECT HOME PAGE

VIEW RELATED INFORMATION

DATA CITATION POLICY

• How to cite ASDC data

Keywords

---